Work Positioning Lanyard
Invest in Safety with genuine Lewis Equipment.™
MADE IN USA
Dual Work Positioning Lanyard DPRL
Description
Dual Work Positioning Lanyard Model DPRL provides a means of work positioning for the user when used along with a full body Fall Arrest Harness such as FW-3 or FW-5 harnesses.
A Retractable Lanyard provides a means of work positioning for the user while working on oil rig or drilling platforms or any other aerial work platform location that has a danger of fall.
The lanyard along with a general full body harness becomes part of a Personal Fall Arrest System (PFAS) and meets or exceeds ANSI/ASSE Z359.1-2007 requirements.
Dual Work Positioning Lanyard Model DPRL is made of 1.25″ yellow nylon tube webbings, with heavy-duty retractable insert to draw slack from a dual positioning retractable lanyard to minimize trip or fall hazard.
The lanyard has a work load of 300 lbs. and comes in 2′, 4′ or 6′ length models.
Lewis Dual Work Positioning Lanyard Model DPRL-6-Y
As part of a Personal Fall Arrest System (PFAS) the lanyard shall be used along with other products for work positioning, climbing, or rescue. The lanyard shall be connected to the back waist / belt of a the full body harness.
Dual Work Positioning Lanyard Features:
« LEWIS WORK POSITIONING LANYARD IS NOT ARC FLASH RATED »
« MAXIMUM WORKING LOAD IS 300 LBS. INCLUDING CLOTHING & GEAR »
Size Chart
| Part No. | Retractable Length | Max Work Load |
|---|---|---|
| DPRL-2-Y | 2' | 300 lbs. |
| DPRL-4-Y | 4' | 300 lbs. |
| DPRL-6-Y | 6' | 300 lbs. |
WARNING!
Read and follow all relevant Safety & Operating Instructions before using this product. It is important that you read and understand all breaking strength, safety and technical data relating to all Lewis Manufacturing Company products before use.
- Connectors and anchorage points must be comparable and able to support 5,000 lbs.
- Rig fall protection to regulatory requirements.
- Do not allow product to contact sharp or abrasive surfaces
- Snaphooks with gate openings larger than one inch (1”) must not be connected to d-rings on harnesses and belts.
- Inspect the lanyard before and after each use.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
For any questions or comments regarding safe usage of this product, please
