BOA Hose Grips™ (Lewis BOA™) Under Pressure Hose Whip Sock in Galvanized Steel, 1″ to 5-1/2″
MADE IN USA
Whip Sock BOA Hose Grips Galvanized Steel
Description
Whip Sock BOA Hose Grips Galvanized Steel, a line of Wire Mesh Grips, a.k.a. Whip Sock, that safely minimizes the dangerous high pressure hose whipping on a hose blow out.
Hose grips similar to suspension grips, provide a strong slip resistance hold on a high pressure hose. The provide whipping protection and keep the operator and equipment at the jobsite safe from hose blow out whipping action of the hose and its coupler fitting connector.
Whip Sock BOA Hose Grips Galvanized Steel (Lewis BOA™) ia part of Lewis Hose grips pulling grips. Also used as a Bundle Keeper grip, made of high strength galvanized steel wires, provide hose abrasion resistance and wear protection near the coupler fitting, where needed the most.
Ideal for High Pressure Hose Carrying:
BOA Hose Grips Features:
Technical Support Specialist
Replace Kellems Pulling Grips or Slingco Pulling Grips!
To replace your Kellems Pulling Grips, Slingco Pulling Grips or any other brand’s wire mesh grip, just contact Lewis Manufacturing (RFQ Form) and ask for a direct replacement of the models of Kellems cable pulling grip or Slingco cable pulling grip that you have. We will provide you with best replacement model number and a quote.
We have the fastest delivery of products in the industry!
Slingco® is a registered trademark of Slingco Limited of Rawtenstall, England
Kellems® is a registered trade mark of Hubbell Incorporated of Shelton, Connecticut USA
Specifications
| Part No. | Size Range | WL lbs. | UTS lbs. | Mesh |
|---|---|---|---|---|
| DLE-BOA-1.0-1.5 | 1" - 1.5" | 6,350 | 19,100 | 26" |
| DLE-BOA-1.5-2.5 | 1.5" - 2.5" | 7,150 | 21,500 | 40" |
| DLE-BOA-2.5-3.5 | 2.5" - 3.5" | 7,925 | 23,800 | 42" |
| DLE-BOA-3.5-4.5 | 3.5" - 4.5" | 8,025 | 24,100 | 44" |
| DLE-BOA-4.5-5.5 | 4.5" - 5.5" | 8,400 | 25,200 | 48" |
Add -SL to the Part No. for Split-Lace Closing
Add -SS to Galv. Steel Part No. for Stainless Steel Grip
Thrust Force Calculations
Use the following formulas for calculating the thrust force created by a broken high pressure hose. The force can be restrained by using a BOA Grip as a Whip Sock.
Reference and our Thanks:
Mark E. Dunbar, PhD, P.E.
Dunbar Engineering Corp
markd@dunbareng.com
WARNING!
Read and follow all relevant Safety & Operating Instructions before using this product. It is important that you read and understand all breaking strength, safety and technical data relating to all Lewis Manufacturing Company products before use.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
For any questions or comments regarding safe usage of this product, please
