Can you provide some guidelines for Ball Bearing Swivel usage?
Inspect swivel carefully before and after each use. Check for cracks around the throat on both ends of the swivel, and on the body of the swivel. If cracks in the body of the swivel are apparent, or if the pins are bent, discard swivel immediately. Make sure the swivel rotates freely and smoothly without any binding. The swivel stem should not be loose, with no up and down or lateral movement. Swivel should be smooth turning and snugly fitted together with no sloppiness in the operation. Do not use a damaged swivel. Before making a pull, make sure swivel pins are tightened and mate up properly. If pins have stripped threads, replace immediately. Pins are available with standard slot grooves or with Allen wrench fittings. Do not exceed the work load stenciled on every Lewis swivel. If you anticipate being within 10% of the work load during any pull, a larger swivel should be considered, especially if any shock loading might occur during the pull. If the work load is in question, please consult with the factory in Oklahoma City by calling Toll-Free 888-398-4719. Do not pull any swivel around a bull wheel that has a smaller diameter than the length of the swivel. Doing so exposes the swivel to a side load, and can permanently damage your swivel. If you know a Ball Bearing swivel has been exposed to an unqualified side load, the swivel should be removed from service and replaced. Lubricate all greasable swivels before and after each use. Make sure there is no debris in the swivel gap, that is, the area where rotation occurs between the swivel body and eye. [...]
